Steel Industry

Steel Industry
Providing reliability even at extreme conditions
The requirements of the steel industry are often demanding. High loads, high temperatures, vibrations, these are some of the few factors that have to be taken care of while designing lubricants for the steel industry. Even a slight breakdown in the machinery can lead to unplanned downtime and result in a great loss. OKS maintenance lubricants brings reliability to the machines even under extreme conditions.
Product name Description Fields of application Attributes Approvals Advantages and Benefits
OKS 2211 Corrosion Protection Spray

A good corrosion protection spray for 

  •  Tools, dies and moulds
  •  Machine guide ways, bearings and fasteners
  •  Diesel loco parts, keys and measuring instruments
Wire Cables, Hinges, Pivoting bearings, Slideways, Rust remove, Levers, Cleaning, Measuring devices, Precision mechanics Effects of water, Effects of weathering, Corrosion protection
  • Good lubricity and water displacement 
  • Non-staining with excellent penetration
  • Protects both ferrous and non-ferrous metals
  • Excellent rust loosener 
  • Lubricates and stops squeaky noise 
  • Coated parts do not stick to each other
OKS 2701 Refrigerating Spray
  • Used for prevention of heat damages when soldering electronic components and protection of adjacent areas during welding process.
  • Short-term temperature adjustment and enables a quick indication of hot spots in electronic components 
  • Cooling the inside parts of assemblies prior to dismantling
  • Small shrink fits
Low temperatures Electrical engineering/Electronic
  • Refrigerates quickly 
  • Leaves no residues 
  • Non-inflammable
  • Non-toxic and harmless 
  • Does not affect plastics, rubbers adversely
  • Can cool surfaces immediately even down To -45°C depending on time of spraying
OKS 571 PTFE Bonded Coating Spray
  • Suitable as a sliding film for packing machines, printing and paper processing units, slides and sliding points in all places
  • Suitable as a parting film to prevent adhesion of sealings and vanes in places where an anti-adhesion effect of rubbers and synthetics is required
Friction bearings, Pivoting bearings, Levers, Slideways, Spindles, Threaded connections, Fittings, Spindled shafts, Camshafts, Springs, Open Gears, Worm gears, Precision mechanics, Hinges High temperature, Low temperature, Effect of chemicals, Workplace freindly
  •  Good adhesion to all metals, synthetics,wood, rubber and glass
  • High resistance to abrasion
  • No pick up of dust
  •  Ideally clean
  • Colourless
  • Dry lubricant film with very low coefficient of friction
OKS 1122 Silicone Grease

A silicone grease that can be used for the lubrication of 

  • Plain and roller bearings operating in a wide range of temperatures subjected to medium to low loads 
  • Life-time lubrication of precision mechanical units and components for all kinds of vehicles 
  • Also can be used in assembly work
Roller bearings, Friction bearings High temperatures, long-acting, Low temperatures
  • Stable against all kinds of oil inorganic acid vapours 
  • Resistant to oxidation
OKS 1114 Stop Cock Grease

For the lubrication of 

  • Stop cocks and slide valves 
  • Bearings and sealings exposed to steam and aggressive chemicals
Seals, Fittings Effects of water, High temperatures, Low temperatures
  • Serves in wide temperature range
  • Stable consistency (-40°C to +200°C)
  • Thermally stable and chemically inert
  • Water repellant and resistant to solvent
OKS 462 Grease for Hot and Cold Water Fittings

A special grease for the “for life” lubrication of 

  • Sanitary fittings for hot water under pressure
  • Overflow fittings of electrical hot water apparatus and pressure rinsing devices
  • Pressure reducers for cold water 
  • For maintaining the sliding capacity and trouble-free functioning of spindles in heating radiator thermostat valves
Spindles, Fittings, Slideways Effects of water, long-acting, Effect of chemicals
  • Excellent adhesion and sealing capacity
  • Resistant to hot and cold water and steam
  • Ageing resistant
  • Lime resistant
  • Resistant against acid and alkaline disinfectants and cleaning products
OKS 2100 Anti-corrosion wax coating
  •  To protect finely machined metal surfaces such as tools, dies, moulds,spare parts, machines etc.
  •  Against corrosion during storage and transport, even under industrial atmosphere, tropical climate and marine conditions
Offshore Corrosion protection
  •  The film is very thin, colourles and dry; on request, the product can also be given in blue colour
  •  It has a lubricating effect
  •  Coated parts can be welded or assembled directly without any preparation
  • The product does not harm rubber and plastic
OKS 280 White High-Temperature Paste

A high-temperature lubricant used for parting lubrication in hot forming operations such as

  • Drop forging and hot extrusion moulding
  • Hot rolling and bending of steel and non-ferrous metals

Good for sliding surfaces of production machinery like column guides of forging process

Threaded connections, Press fitting High temperatures
  • Improved surface finish of goods
  • Improved service life of tools
  • High efficiency due to optimal formula of solid lubes providing good separating effects
  • Free from graphite which may lead to carburizing of tools and / or working pieces
OKS 91621 Anti-spatter Spray
  • As an anti-spatter spray in welding applications
Cleaning
  • Extends nozzle life and ensures free flow of wire
  • Spatters from the surrounding areas can be removed easily where spray has been applied
  • Easy removal of sliding spatter by brushing
  • Provides a quick, easy way to prevent adherence of spatter of metal surfaces during welding and eliminates the need for chiseling, grinding or wire brushing after welding
  • It prevents the obstruction of automatic and semi-automatic welding process
OKS 93521 High Temperature Chain Oil Spray
  • Aerosol version of OKS 9352 for easy application on surfaces difficult to reach
  • Can be sprayed on evenly, without difficulty
Hinges, Spindles, Camshafts, Linear guide systems, Levers, Slideways, Friction bearings, Chains, Wire cables, pivoting bearings High temperatures, Heavy loading, Effects of water
  • Clean lubrication with minimum evaporation loss
  • No formation of residues
  •  Protection against wear
  •  Emergency lubrication through Mo-Active  additives
  • Performance over a wide temperature range
  • Available in four different viscosities
OKS 2131 Heavy Duty Corrosion Inhibiting Spray
  • Protects uncovered surfaces, readily accessible interior surfaces of machines, pipes, heat exchangers, boilers, turbines, transformers etc., during standby, storage or shipping even in outdoor environment.
  • Protects metals parts, components or assemblies between processing or machine steps.
  • Protects external and internal surfaces of equipments on offshore drilling and production platforms.
  • Protects wire ropes, cables, wires, chains, transmissions, hydraulic pistons, cylinders and structural components.
  • Also used as an equipment undercoating.
Offshore Corrosion protection, Effects of water, Effects of weathering
  • Is an removable coating that provides optimal corrosion protection for metals exposed to indoor as well as outdoor environment
  • Provides semi-dry translucent film
  • Moisture displacing and penetrating film
  • Thermally stable coating over a broad range of temperatures
  • Excellent UV and Salt spray resistance
  • Prevents galvanic corrosion between dissimilar metals
  • Conforms to MIL-C-16173 D (Grades 1 and 2)
OKS 2901 Belt Dressing Spray
  • For dressing of all types of industrial belts (round or V).
  • For prevention of belt squeaking, slip, drying out, embrittlement and cracking.
  • Prolongs the belt life considerably
  • extremely well adhering even at high speeds
Belt drives
  • Used for all kinds of round and V belts on blowers, compressors, pumps, mills, etc.
  • Prolongs belt life considerably
  • Can be applied on both new and old belts
  • Enhances the grip of the belt without making the belt sticky
    OKS 92621 SAFE LC SPRAY CFC Free for Live Circuits

    Cleaning of all kinds of electrical equipments such as

    • Distribution boxes,
    • Circuit breakers in the industrial and automobile sectors,
    • Electronic components such as PCBs, regulators, meters and switching network.

    Ideal support for all maintenance and after sales service in electronic / maintenance industry.

    Electrical Contacts Electronics
    • Can be sprayed on live circuits up to 440 V
    • Instant cleaning and free of residues
    • Harmless to insulating material and plastics
    • Odourless
    • Evaporates quickly without overfreezing and residues
    • Zero ozone depleting potential
    OKS 2621 Spray for Non-Live Circuits

    Cleaning of all kinds of electrical equipments such as

    • Distribution boxes,
    • Circuit breakers in the industrial and automobile sectors.
    • Electronic components such as PCBs, regulators, meters and switching network.

    Ideal support for all maintenance and after sales service in electronic / maintenance industry.

    Electrical Contacts Electronics
    • Instant cleaning and free of residues
    • Harmless to insulating material and plastics
    • Odourless
    • Evaporates quickly without overfreezing and residues
    OKS 2601 Cleaner and degreaser spray

    A powerful cleaner and degreaser spray for

    • Cleaning and degreasing metal surfaces before surface treatment.
    • Cleaning and degreasing of oily, greasy and sticky components such as ball bearings, guideways, bolts, chains, hinges, etc.
    Cleaning Workplace-friendly
    • Extremely pure cleaning liquid for all kinds of metals and glasses with no corroding effect
    • Economical, saves time
    • Easy removal of brake fluid, oil residues, resin crusts and adhesives
    • The aerosol jet action helps the cleaning process
    OKS 2600 Cleaner and Degreaser

    A cleaner and degreasing liquid for cleaning and degreasing metal surfaces of oil, grease and dirt residues, prior to applying rust preventives and as a cleaner during repair jobs, etc.

    Cleaning
    • Strong cleaning power
    • Good penetration
    • Quick evaporation without any residue
    OKS 2160 Long term corrosion protection liquid for outdoor applications
    • For protection of dies, valves, forgings, castings, stampings, pipes, fasteners, structurals, machinery, shafts etc., during storage and shipping in outdoor environments including harsh marine atmospheres and offshore conditions.
    • Useful for corrosion preventive applications in the automotive field
    Long acting, High temperature, Low temperature, Corrosion protection, Effects of weathering
    • Effective for a wide range of applications, under a wide variety of outdoor conditions
    • The film is thermally stable
    • It has excellent salt spray rating and is resistant to acid fumes
    • Free from silicones, phosphates and heavy metals
    OKS 2140 Long term corrosion protection liquid for indoor applications
    • Corrosion protection during storage and transit in indoor and covered outdoor conditions
    • Transmission, hydralic pistons & cylinders, casings, tools, machines,pipes, equipments etc
    Hydraulics, Storage/Shipping Long-acting, Effect of chemicals, Corrosion protection
    • Provides good protection against humidity, marine environment, and acid fumes (picking bath)
    • Does not contain chlorinated solvents
    OKS 2101 Anti-Corrosion Wax Coating Spray

    An anti-corrosion wax coating spray for

    • The protection of finely machined metal surfaces such as tools, dies, moulds, spares, machines, etc.
    • The protection of goods during storage and transport, even under industrial atmosphere, tropical climateand marine conditions
    Storage/Shipping Effect of water, Effect of weathering, Corrosion protection
    • Easy to apply
    • The film is very thin, dry and colourless
    • Lubricates and protects
    • Can be applied on painted surfaces
    • Coated parts can be welded or assembled directly
    • Does not harm rubber or plastics
    OKS 451 Adhesive Chain Lubricant Spray

    An adhesive chain lubricant spray for simultaneous internal and external lubrication of

    • Roller chains as in forklifts, motorcycles, etc.
    • Chains operating under water, salt water or steam.
    • Chains operating in dirty / dusty atmosphere.

    Also used for

    • Long-term lubrication of small gear drives, bearings, locking mechanisms, hinges, etc.
    • Lubrication and corrosion protection of wire ropes of all kinds.
    • Lubrication of sliding tracks, column guides and machine parts exposed to water.
    • Long-term lubrication of bowden cables, spring assemblies, clutch / brake levers and pedals.
    Chains, Pivoting bearings, Levers, Slideways, Spindles, Seals, splinded shafts, Camshafts, springs, open gears, Worm gears, Hinges, Wire cables Effects of water, Long-acting, Corrosion protection
    • Exteremely adhesive
    • Resistant to water, salt water and gives
    • excellent protection against corrosion
    • Good protection against wear because of Mo -complex compounds x
    • Easy to apply
    • Good penetrating properties
    OKS 9361 Oil-Based, Heavy-Duty Corrosion Inhinitor

    A heavy-duty corrosion inhibitor spray for

    • The protection of semi-finished and finished machines, components, tools, spares, bearings, shafts, etc. during storage and transport, even in extreme conditions like coastal and marine atmosphere.
    • The protection of plastic injection moulds used to manufacture precision electronic components.
    Sheet-metal processing, Offshore, Storage/Shipping Effects of weathering, Effects of water, Corrosion protcetion, Long-acting
    • Easy-to-use spray
    • Provides lubrication and protects the metal in extreme conditions
    • Resistant to UV rays
    • Free from nitrites, phosphorus, chromates and heavy metals
    • Economical due to low consumption (1 kg covers 10 - 20 m2)
    OKS 9360 Oil based heavy duty corrosion inhibitor
    • For protection of semi finished and finished machines and components during storage and transport, even in extreme weather like coastal and marine atmospheres.
    • Protects plastic injection moulds used to manufacture precision electronic components.
    Offshore, Sheet-metal processeing, Storage/Shipping Corrosion protection, Effects of weathering, Effects of water, Effect of chemicals
    • Corrosion Protection upto 12 months
    • Provides lubrication, protects the metal in extreme conditions, and is resistant to UV rays
    • Free from nitrites, phosphates, chromates and other heavy metals
    OKS Silicone Grease OKS Silicone Grease

    For bearings - ball bearings and plain bearings

    • operating at moderate loads and speeds.
    • moderate to high temperature fans, heater fans, ball and socket joints, clutch assemblies.
    • Used in textile and automotive industry
    Roller bearings, Friction bearings, Seals, Fittings, Hinges High temperatures, Low temperatures, Long-acting
    • Good resistance to oxidation
    • Can withstand a wide range of operating temperature
    • Provides long life and trouble free maintenance
    OKS HD 1250 MO High Performance EP Grease

    Used to

    • Lubricate roller and plain bearings exposed to high or severely high load.
    • Also for lubricating low speed bearings subjected to shock loads.
    • Reduces friction and wear on mechanisms exposed to very high loads and prevents bearing abrasive build up and corrosion.
    • Provides lubrication also in the presence of water
    Heavy loading, Corrosion protection
    • Solid lubricants ensure emergency running properties
    • High base oil visocity and water resistance soap texture is specifically suited for heavily loaded low speed bearings operating under normal and possibly shock load conditions
    • Four ball test weld load of >4000 N
    OKS 1110/6 Silicone Valve and Packing Grease

    Silicone grease used for

    • lubrication of stop cocks and valve seals,
    • cold and hot water valves in plumbing and heating.
    • Lubrication and protection of O-rings, rubber seals and plastic parts
    Seals, Fittings Effects of water, High temperatures, Workplace-friendly, cup
    • Non-toxic, non-melting and a good adhesive sealing
    • Constant consistency over a wide temperature range
    • Resistant to hot / cold water as well as to acetone, ethanol, ethylene glycole, glycerine and methanol
    OKS 1110 Silicone Valve and Packing Grease

    Silicone grease used for

    • lubrication of stop cocks and valve seals
    • cold and hot water valves in plumbing and heating.
    • Lubrication and protection of O-rings, rubber seals and plastic parts
    Seals, Fittings Effects of water, High temperatures, Workplace-friendly, cup
    • Non-toxic, non-melting and a good adhesive sealing
    • Constant consistency over a wide temperature range
    • Resistant to hot / cold water as well as to acetone, ethanol, ethylene glycole, glycerine and methanol
    OKS 9480 Synthetic High-Temperature Grease

    For the lubrication of bearings and sliding parts exposed to

    • high temperature,
    • heavy loads,
    • slow and moderate speeds.

    For the lubrication of oven trolley bearings, conveyor bearings, calendar roll bearings, induced draft fans, drier bearings, etc.

    Roller bearings, Friction bearings, Slideways, Linear guide systems High temperatures, Effects of water, Heavy Loading
    • Resistant to hot and cold water
    • Does not contain any silicones
    • Used for applications involving painting or any other surface treatments
    OKS 475 HS High-Speed Bearing Grease

    With a DN factor of 1,000,000 this is ideally suited for

    • bearings operated at high speeds and extremely low breakaway torque in textile machines, CNC machines tools and internal grinding machines.
    • Suitable for high-speed spindles.
    • Used as a low-resistance, white grease in the electronic industry.
    Roller bearings, Friction bearings, Pivoting bearings, Levers, Linear guide systems, Spindles High speeds, Low temperatures, Electrical engineering/Electronics
    • Excellent adhesion and sealing capacity
    • Resistant to hot and cold water and steam
    • Ageing resistant
    • Lime resistant
    • Resistant against acid and alkaline disinfectants and cleaning products
    OKS 418 High-Temperature Grease

    An extreme-temperature, non-melting grease used in

    • bearings of lacquering stoves,
    • drying ovens and mixers,
    • vulcanising plants,
    • furnaces, etc.
    Roller bearings, Friction bearings, Pivoting bearings, Linear guide systems, Spindles High temperatures, long-acting
    • Ensures sufficient and economical lubrication at high temperatures
    • No drop point, hence it does not melt or run out
    • Long-term lubrication of greasing points subjected to high temperatures
    OKS 410 MoS 2 High-Performance, Long Life Grease

    A high-performance, long-life grease for all bearings exposed to

    • Extreme pressures and shock loads.
    • For splined shafts and threaded spindles.
    • For rough operating conditions like in rolling mills, building and agricultural machinery and for wet operating conditions like beverage, foodstuff or mining.
    Roller bearings, Friction bearings, Pivoting bearings, Levers, Slideways, Spindles, Splined shafts, Camshafts, Springs, Open Gears, Worm gears Heavy loading
    • Very high load carrying capacity
    • Performs well in rough operating conditions and in humid atmospheres
    • Extension of relubricating intervals
    • Four ball load of 4000 N
    • Optimum protection against corrosion
    OKS 400 MoS2 Multi-purpose Heavy-Duty Grease

    Used in the lubrication of

    • Journal and roller bearings,
    • threaded spindles,
    • highly stressed joints,
    • small gears and
    • knock-out splined shafts
    Roller bearings, Friction bearings, Pivoting bearings, Levers, Slideways, Spindles, Splined shafts, Camshafts, Open Gears, Worm gears Long-acting
    • Safety lubricant
    • Extension of relubricating intervals
    • Reduction in wear and improved sealing of stuffing boxes
    OKS 1000 Series Silicone Oils

    As a silicone based mould release agent for injection moulding and extrusion of plastics.

    • As a lubricant for the insertion of rubber profile sections in window and door systems
    • Made out of plastic and aluminum.
    • As a protective film to prevent the sticking of plastic sheets in presses.
    • As a lubricant for cutting edges of tools used in cutting paper and cardboard.
    • For lubricating rubber and plastic components.
    Levers, Linear guide systems, open gears, Fittings, Precision mechanics, Hinges, Slideways, Seals Workplace-friendly, High temperatures, Low temperatures, Compatible with plastics
    • High efficiency because of excellent netting of the surface and building of extremely thin lubricating films
    • Seperating effect with antistatic properties
    • Manifold applications for permanent lubrication, protection, maintaining and impregnation
    • Neutral behaviour against plastic and elastomers
    • Resistant against water and atmospheric influences
    OKS 640 Multi-Functional Fluid

    A multi-functional fluid for

    • Easy and quick dismantling of seized screws, bolts, chain links, joints, levers, springs, valves, locks, hinges, etc.
    • Starting wet engines.
    • Eliminating squeaking noises from appliances.
    • Cleaning complicated assemblies like mechanical watches.
    Friction bearings, Chains, Pivoting bearings, Levers, Slideways, Linear guide systems, Spindles, Threaded connections, Fittings, springs, Measuring devices, Hinges, Precision mechanics, Wire cables, Fittings, Splinded shafts, Threaded connections Effects of water, Effects of weathering, Sprayable with Airspray System, Long-acting, Corrosion protection
    • A single, handy product to make a worker’s life easy
    • Loosens rust rapidly and inhibits corrosion
    • Displaces moisture
    • Restores wet electrical contacts
    • Lubricates precision components
    • Cleans complicated and delicate assemblies
    OKS 352/2 High-temperature Chain Oil

    A high-temperature chain oil for the liquid lubrication of chains, stenters, joints,slide ways, open bearings, etc. operating under low or high temperatures (upto +210°C) or heavy loads as in

    • Transport systems,
    • Drying and varnishing plants.
    • Chains operating in presence of saturated steam 
    • Chains in glass works, foundries, rolling mills and paint shops
    Friction bearings, Chains, Pivoting bearings, Levers, Slideways, Linear guide systems, Spindles, Camshafts, Hinges, Wire cables High temperatures
    • Good wetting and adhesive properties and does not dry or drip even at high temperatures
    • Leaves no residues
    • Long-term lubrication without wear
    • Compatible with paints and does not cause any discolouration, cratering or any surface disruptions
    OKS 9352 High-Tempreture Chain Oil

    A two-phase lubricant with synthetic oil and additives providing thermal stability and lubricity and Mox -Active additives offering extreme resistance to wear. Ideally suited for

    • Chains exposed to high temperatures / heavy loads, water and steam
    • Drying ovens, kilns and furnaces, drawing and varnishing plants.
    Friction bearings, Chains, Pivoting bearings, Levers, Slideways, Spindles, Linear guide systems, Camshafts, Hinges, Wire cables Heavy loading, Effects of water, High temperatures
    • Clean lubrication with minimum evaporation loss
    • No formation of residues
    • Protection against wear
    • Emergency lubrication through Mox -Active  additives
    • Performance over a wide temperature range
    • Available in four different viscosities
    OKS 330 High-Speed Oil

    An ideal synthetic lubricant for

    • Roller bearings operating at very high speeds
    • Bearings in turbines 
    • Synchronous motors and gears of sophisticated equipments
    Roller bearings, Friction bearings, Spindles, precision mechanics High speeds
    • Provides very low internal resistance and does not form any hard residues
    • Especially suited for open end machines in textile industry
    OKS Chisel Paste High Temperature paste to prevent seizure and wear

    Used for

    • Preventing seizure and premature wear of thread-in/plug-in tools, wearing bushes used in pneumatic/hydraulic hammers
    Threaded connections Corrosion protection
    • OKS Chisel Paste forms an efficient lubricating and anti-seizing film on the surface and prevents these from normal or fretting corrosion
    • It is an ideal lubricant for threaded connections and also wearing bushes, which are exposed to vibratory loads
    • It is equipped with special additives and solid lubricants such as copper and graphite in an aluminium complex base
    OKS 265 Chuck Jaw Paste
    • Assembly lubrication of friction and sliding surfaces under heavy, jerky and vibrating stress; particularly proven for the lubrication of huck jaws of machine tools and to prevent fretting corrosion
    • Long-time lubrication of moving parts subject to vibrating stress i.e., control and power mechanisms in hur environment on filling, abelling and packaging machinery also
    Levers, Spindles, Splined shafts, Chucks Effect of chemicals, Heavy loading, Effects of water
    • Best use for contamination free assembly and long-time lubrication
    • High efficiency due to well balanced solid lube combination
    • Manifold application wherever machine components are contamination sensitive and work in humid environment
    • Minimum consumption by applying a thin coating (1kg covers approx. 40 sqm)
    OKS 246 Anti-Seize Compound
    • For lubricating and maintaining easy action of screw-joints subjected to high temperatures and corrosive influences, e.g., armatures, turbines
    Threaded connections, Brakes High temperatures, Effects of water, Compatible with plastics
    • Prevents sintering, seizing or rust caused by high temperatures even after prolonged operation
    • Provides optimum combination of screw tightening torque and achievable screw pretension
    • Ensures reliable non-destructive dismantling
    OKS 9241 (formerly known as OKS 241) Anti-Seize Spray
    • Aerosol version of OKS 240 for easy application on surfaces difficult to reach.
    • Can be sprayed on evenly, without difficulty
    Threaded connections, Brakes High temperatures, Effects of water, Heavy loading, Workplace-friendly, Compatible with plastics
    • Prevents seizing and sintering at high temperatures
    • Provides effective corrosion protection even under salt water conditions
    • Provides optimum balance between tightening torque and pre-tension
    • Average release torque of 250 lb-ft
    • Meets U.S. Military Spec. No. MIL-A-907E
    OKS 240 Anti- Seize Compound

    Special copper-based compound for protection of threaded connections exposed to high temperatures or corrosive atmosphere in

    • Threads
    • Hot steam lines, turbines and power plants
    • Rack and pinion arrangements submerged in marine / sea wate
    Brakes, Threaded connections Heavy loading, High temperatures, Effects of water, Workplace-friendly, Compatible with plastics
    • Prevents seizing and sintering at high temperatures
    • Provides effective corrosion protection even under salt water conditions
    • Provides optimum balance between tightening torque and pre-tension
    • Average release torque of 250 lb-ft
    • Meets U.S. Military Spec. No. MIL-A-907E
    OKS 201 MoS2 Assembly Spray
    • Aerosol version of OKS 200 for easy application on surfaces difficult to reach
    • Can be sprayed on evenly, without difficulty
    Friction bearings, Pivoting bearings, Levers, Slideways, Spindles, Press fitting, Brakes, Camshafts, Open Gears, Closed gears, Worm gears Heavy loading
    • Extremely economical for all assembly and repair work
    • Protects against wear, seizing and stick slip
    • Makes assembling and dismantling easy
    OKS 200 MoS2 Assembly Paste
    • Standard assembly lubricant for production and repair work
    • Used in press fitting of wheels, bearings, threaded spindles, splined shafts,
      supports, guides and slide ways
    • Provides emergency lubrication for plain bearings
    • Provides emergency lubrication when oils and greases fail
    Friction bearings, Pivoting bearings, Levers, Slideways, Spindles, Press fitting, Brakes, Camshafts, Open Gears, Closed gears, Worm gears Heavy loading
    • Extremely economical for all assembly and repair work
    • Protects against wear, seizing and stick slip
    • Makes assembling and dismantling easy
    OKS 111 Micro-Refined MoS2 Spray
    • Aerosol version of OKS 110 for easy application on surfaces difficult to reach.
    • Can be sprayed on evenly, without difficulty.
    Friction bearings, Levers, Slideways, Spindles, Seals, Moulding, Splined shafts, Camshafts, Brakes, Open Gears, Worm gears, Fittings
    • Reduction of friction and wear within a very wide temperature range
    • Resistance to radiation and corrosive attack
    • High degree of purity and completely free from abrasive components — purity of a minimum of 98%
    • Particle size of 1.5 micron
    OKS 110 Micro-Refined MoS2 Powder
    • Dry lubrication in presence of oxygen, vacuum or under radiation.
    • Friction-reducing additive for plastic, rubber and syntex materials.
    • Coating of small parts for precision engineering in tumbling process.
    Friction bearings, Levers, Splined shafts, Brakes, Spindles, Camshafts, Moulding, Open Gears, Seals, Slideways, Fittings, Worm gears
    • Reduction of friction and wear within a very wide temperature range
    • Resistance to radiation and corrosive attack
    • High degree of purity and completely free from abrasive components — purity of a minimum of 98%
    • Particle size of 1.5 micron
    OKS 2801 Leak Detector Spray, Frost Proofed to -15°C
    • Detection of leaks at pipes and containers under pressure, e.g., compressors, gas bottles, armatures, blocking valves, gas masks, autogeneous and inert-gas welding equipment, Bunsen burner, valves, screwings of compressed-air pipes etc.
    • Suitable for compressed air, refrigerant media, acetylene, butane, natural gas, oxygen, propane, city gas, nitrogen, hydrogen and ammonia
    Leak detection Workplace-friendly, Sprayable with Airspray System
    • Best suitability to detect even smallest leaks, which are immediately visualised by the formation of bubbles at the leaking spot
    • Saves energy and warns of gas loss
    • Non toxic, no corrosive effects
    OKS 2650 (NSF A1) (BIOlogic) Biologic Industrial Cleaner, Water based concentrate
    • For removal of very greasy, oily and sooty dirtiness, eg. at construction machines, trucks, construction and super structures, tooling machines, beverage and goods automates, of oil and lubricant residues on workshop floors
    Weld release Compatible with plastics, cup, Environmental friendly
    • Synergetic combination of active substances with corrosion protective additives
    • Free from solvents, therefore no harming vapours
    • Biodegradable, excellent seperation behaviour
    • Protects plastics, sealing, rubber and sensitive metal surfaces
    • NSF Reg. No. 129003 A1
    OKS 621 Frost Breaker Spray

    A spray for fast and non-destructive disassembly of extremely seized-up parts or bolts for

    •  Vehicles, agricultural or construction machinery, vessels,port facilities & also for all machiney in industry and trade
    Rust remover, Low temperature Low temperature
    • Cools down the parts/screws rapidly to -40°C leading to slight shrinkage of affected profile. This results in capillary cracks allowing easy penetration of creeping oil
    • No damages through overheating
    OKS 2521 Gloss Zinc Spray

    For repairing of zinc-coated surfaces which have been damaged by welding, machinery or cutting without subsequent painting

    Steel construction, Sheet-metal processing High temperature, Corrosion protection
    • Can be applied on ferrous and nonferrous metals
    • Combines corrosion protection and decorative coating
    • Very good electrical conductivity
    • Easy to use and economical
    • Good temperature range (up to +490°C)
    OKS 536 (NSF H2) Aqueous Graphite Bonded Coating Air Curing
    • High temperature chain lubrication in annealing furnaces, hot extrusion, moulding and forging of non-ferrous metals.
    • Dilutable with water, depending upon the application
    Chains, Levers, Slideways High temperatures, Effects of weathering, Workplace-friendly, cup
    • Environmentally gentle, dry lubrication, especially for high temperature application
    • Non-toxic, bio-degradable and non-polluting components
    • Food grade approval by NSF: Reg. No. 130416 H2